| Posted by: Hax on 01/25/08
I disassembled the front end, cleaned all the contacts cleaned
up the headlight motors etc. On the buckets, I cleaned them
thoroughly
them with lacquer thinner and a brush. I then used a small file to
smooth out any pitting. I used a flat black spray bomb and a
rolled up
rags with lacquer thinner to clean off the fins. When it was dry
I used
the rag again to get any streaks I might have missed... A lot of
time... But I think the spray bomb and lacquer thinner was around
$10.
Been three years, still looks great...
|